In this article, my dear readers, we will read about the Introduction of Motherboard. We will read about how the motherboard is made and what is its function in the computer. You will also know how important it is for a computer.
It is a circuit board made of plastic. Which has structures similar to fine threads made by metal. The structure of this metal is called BUS.. By which various signals or information are exchanged in the form of electric current. This connects the CPU to other components. The motherboard is the foundation of the computer. Processors of different types of cards in the computer such as display cards, sound cards, etc. are installed on the motherboard itself. This is the main Part of the computer.
There is a place to place RAM on the motherboard, in which we can install RAM as per our requirement. It is an executive memory, that is, it works only when working on a computer. When the computer is turned off, all the information stored in it is destroyed. Information is temporarily kept here.
ROM means read only memory. As is clear from the name itself, the information stored in this memory can only be read, it cannot be changed. Information remains stored in ROM even after computer is turned off.
This is the second auxiliary processor of the computer. It is used in scientific calculations and floating-point calculations of algebraic functions.
Also called a graphics accelerator card, display adapter, or graphics card. It is a part of hardware, whose function is to display a picture or scene on the screen.
Most PCs are made for multimedia. The sound card is placed in a slot on the mother board and there is also an inbuilt sound card in the form of a chip on the mother board. Music, speech or any sound can be heard with the help of a sound card.
behind the PC where the power cable is connected. It is a power supply. It converts AC voltage into DC voltage suitable for various components of the computer. Computer components require + -5 Volte.
The system unit has a speaker for some sound signal. Like when the computer is turned on, the beep sound is produced by the speaker before the screen is turned on.
This is the internal clock on the mother board. Which runs from the battery. And produces electrical plus to synchronize the operations of the computer. And its speed is calculated in GHz.
This is the fixed location on the computer’s motherboard where a slot is made to connect another device in the future.
The front of the system unit consists of a power switch, reset button, floppy drive and DVD drive. Power switch is used to turn on or off the power supply in the system. The reset button is for the system to turn on again without turning off the power supply. This system is used in case of hanging. Floppy drive and DVD drive are suitable for reading and writing floppy and DVD respectively.
The rear part of the system unit consists of ports and jacks for connecting various peripherals.
These are as follows:-
- Power socket
- Keyboard port
- Monitor port
- Serial port
- Parallel port
- Audio jack
- HDMI port
- Network port
- USB port
- SCSI port
Dear readers, if you are preparing to buy a new computer, then you should buy a computer with the right standards according to your work. Dear readers, I believe you would have liked this article Introduction of Motherboard. Meet in the new article with an interesting topic. Thank you